|
|
SolidWiring Technology |
+ ----------------------------------------------------------------------- + |
+ ----------------------------------------------------------------------- + |
DRL & Fog Light Solutions for Toyota Vehicles. |
P.O. Box 40548, Raleigh, N.C. 27629-0548 USA 919-801-9119 Hours 7 - 10 pm EST M-F Noon - 5 pm EST S-S |
techinfo@solidwiring.com |
We specialize in the GROUND side! |
+|+ |
Copyright 2008 SolidWiring.com |
We cut NO wires |
We cut NO wires |
+|+ |
+|+ |
+|+ |
Our current test vehicles: 2006 Tundra LTD 4x4 DC 2002 Tundra LTD 4x4 AC 2003 Sequoia LTD 4X4 |
BATTERY WARNING: ALWAYS wear safety glasses and have water available for emergency eye flushing. ALWAYS remove the negative cable from the battery FIRSTand install the negative cable last. Cover the post with a rag to keep the cable and post seperated. |
Please read ALL info before making a purchase. |
2000 - 2006 Tundras & Sequoias w/DRL DRL Switchable Modification (DRL controlled by a factory switch) DRL601 - Factory switch, custom wiring harness w/ factory connections kit, installation accessories, and instructions. Install Time: 1 hour Tools Needed: 10 mm & 12 mm sockets, rachet, extension, phillips screw driver, a cutting tool (scissors or dykes), and 10 mm & 12 mm wrenches. note: For Tundra DC w/o side air bags, Tundra AC w/ auto trans, & all Sequoias |
Tundra Fog Light Modification Fog Light Modification (for vehicles with drl ONLY) (fog lights can be used without turning on the headlights or parking lights) FOG601 2004 - 2006 DC w/ factory fog lights w/o side air bags. Custom wiring harness w/ factory connections kit, installation accessories, and instructions. FOG602 ALL Tundra models w/ factory fog lights and the switch is part of the headlight stalk Custom wiring harness w/ factory connection and generic ground, installation accessories, and instructions. FOG603 ALL Tundra models w/factrory fog lights and the switch is independent of the headlight stalk Custom wiring harness w/ factory connection and generic ground, installation accessories, and instructions. Install Time: 45 minutes Tools Needed: 10 mm socket, rachet, extension, phillips screw driver, 10 mm & 12 mm wrenches, and a small pick tool. ( pick tool can be as simple as a toothpic or small screw driver) |
_________________________________________________________________________ |
All Tundras and Sequoias DRL Wiring Harness DRL602 - Custom wiring harness w/ factory exterior connectors. The interior switch and connections are NOT provided. Any on/off switch will work with this harness. note: Fits ALL Tundras & Sequoias |
$119.99 |
$59.99 |
FOG601 $39.99 FOG602 $29.99 FOG603 $29.99 |
All of our Solutions are simple and easy to replicate. Just research your system and add a switch or ground the system. Or, just buy from us. We have already perfected the Solutions using factory parts. Plus, with our Solutions, there are no wires to cut. NONE! |
Please Note: All parts are factory new except long lengths of wiring. The above solutions have been installed and tested on a 2006 Toyota Tundra DC 4x4 without Side Curtain Airbags. If your Tundra has Side Curtain Airbags, contact us and we will make a solution specifically for your vehicle. Through our research, the DRL602 solution will work on all Toyota Tundras and Sequoias. |
DRL601 Installed 2006 Tundra DC |
_________________________________________________________________________ |
_________________________________________________________________________ |
Fog601 |
_________________________________________________________________________ |
_________________________________________________________________________ |
VEHICLE MUST HAVE DAYTIME RUNNING LIGHTS |